Laminating the outer part of the hull almost ready. Started with the stems to get them as good as possible. Small pieces of twill to get a perfect fit. After stems were hardened I covered the rest of the hull. No problems exept for the fact that the Swedish standard width of the glass fibre is a little less than the width of the canoe. I will have to add a small stripe of glass fibre on the widest point.
 |
Hull ready exept for two strips of gass at the widest point.
The width of the glass was just a little to small to cover all the way.
These stripswill be laminatet separately
|
 |
Stems laminated and covered with peel ply to get an even surface.
The peel ply is ripped off once the epoxy is fully hardened.
|
