Since last update I have now glued all strips in place and finally I put the last piece of strips into the hull. Next step is a lot of sanding.
 |
| Center strips glued into place. Cleats and pins to hold it in place |
 |
| Center piece finally aligned |
 |
| Fine adjustments of center piece |
 |
| Center piece roughly cut out to the line. |
 |
Center piece aligned and secured by pins. The outline of the
strip was now drawn with a sharp pencil from the underside
|
 |
| This piece will be marked and shaped to exactly fit the hole |
 |
| Two strips with straight edges glued together |
 |
Final cove and bead strip in place. On the next strip the cove side will be
planed to a straight edge to make it possible to fit the last piece.
|
 |
| Hole is smaller and smaller |
 |
| Looks OK |
 |
| Another strip |
